 
|
High Speed Triple Roller Mill Roll Type Mixing Mill Rotating Speed 0 - 500RPM
Product Details:
| Place of Origin: | China |
| Brand Name: | ZYE |
| Certification: | CE |
| Model Number: | ZYTR-80E |
Payment & Shipping Terms:
| Minimum Order Quantity: | 1 |
|---|---|
| Packaging Details: | wooden package |
| Delivery Time: | 10-30 days after payment |
| Payment Terms: | Western Union, T/T, L/C |
| Supply Ability: | 10 Sets per month |
|
Detail Information |
|||
| Condition: | New | Place Of Origin: | Guangdong, China |
|---|---|---|---|
| Power Configuration: | Servo Motor | Output: | 0-20 L/h |
| Roller Material: | ZrO2/ Al2O3/ SiC/ Si3N4 Optional, Nanoscale Ceramic Roller | Roller Length: | 200mm |
| Power /Voltage: | 2.0KW/ 220V | Option Configuration: | The Roller Can Be Heated Or Cooled (optional) |
| High Light: | High speed Triple Roller Mill,500RPM Triple Roller Mill,Servo motors three roll mill |
||
Product Description
High-speed three-roll mill, roll-type mixing mill, rotating speed 0-500RPM
Product specification
| SPECIFICATION FOR ZYTR-80E THREE ROLL MILL | |
| Diameter of Roller | 80mm |
| Roller Speed Ratio | 1:03:09 |
| Power/Voltage | 2KW/220V |
| Size | L650*W460*H500mm |
| Concentricity/Straightness | < 2 micron |
| Length of Roller | 200mm |
| Power Configuration | Servo Motor |
| Throughput | 0.02-20L/h |
| N.W. | 70KG |
| Planeness | < 0.3 micron |
Main feature
1. Roller Material: ZrO2/ Al2O3/ SiC/ Si3N4, Nanoscale Ceramic Roller
2. Ceramic Roll Speed: 0-500RPM
3. Power Configuration: Servo motor, Steady moment, Safe and reliable
4. Touch screen
5. High precise (minimum 1μm, depend on materials)
6. Ceramic roller precision: concentricity < 2 micron,
linear degree < 2micron, exterior planeness < 0.3micron
7. Easy-cleaning roller
8. Hopper(optional)
Preparation before use:
1.Check whether the position and locking of each component are normal, inject lubricating oil according to the point shown in the figure, and turn on the power
2.Adjust the front, rear, left, and right handwheels to observe whether the roller linkage is normal
3.Remove the dirt on the roller surface: wipe with soft paper or clean cotton yarn, release the knob of the baffle plate
4.Adjust the gap between the front and rear rollers and the middle roller to 0.5 mm, and then start the power supply to idle for 1-2 minutes.
Package&Shipping
- Packing: 1set/ wooden box
- Outside package: Standard export wooden
- Inner package:Shock-proof plastic film