Notes on using a planetary mixer

1. When connecting the power, it is necessary to ensure that the ground wire is connected normally to prevent accidents to the greatest extent.
2. When starting the adjustment, from top to bottom, the rotation direction of the planetary carrier of the planetary gravity mixer is clockwise.
3. When the barrel of the planetary gravity mixer breaks into the seat, the barrel must be fixed first to ensure that the planet carrier and the barrel are sealed before the equipment can run.
4. If the material must be defoamed in a vacuum, it is necessary to first check whether the water tank of the planetary gravity mixer is filled with water, and check whether the sealing characteristics of the vacuum tube are good enough.
5. When using the planetary gravity mixer hydraulic station, you must pay attention to observe the pressure mark in the equipment, and do not open too much pressure.